A lamp measures the air quality

CSP has been developed a prototype unit for measuring the indoor air quality (IAQ). All sensors are integrated on a customized board and measurement are sent to a server using WiFi connection. A lamp has been suitably modified to accommodate inside the sensors and electronic boards.

Air pollution isn’t only an outdoor problem. The […]

MeteoIdro: a remote monitoring station using TETRA network

In this project an hydrometric station has been developed using high performance radar water level sensor and low power embedded systems. The entire system is powered by solar energy and uses a Texas Instruments MSP430 micro-controller for all operations.

Level water measurements are requested to sensor in polling mode, stored in a microSD and […]

Gnuradio package is available on Odroid boards

 

gnuradio on odroid board

GNU Radio is a free software development toolkit that provides the signal processing runtime and processing blocks to implement software radios. GNU Radio SDR toolkit has been compiled to the ARM architecture and tested on Odroid-X, Odroid-X2 and Odroid-U2 boards running Linaro, a Linux distribution based on Ubuntu 12.11.

[…]

Air quality monitoring on GTT electric bus

The MASP (Monitoraggio Aree Sensibili e Protette) project was completed on February 28th 2013 and as final step it has been installed a mobile testbed on the electric bus of the company Gruppo Torinese Trasporti (GTT). This project aims at the development of an air quality monitoring system for sensible and protected areas. The MASP […]

Gnuradio on Odroid-X

The GNU Radio SDR toolkit has been cross-compiled to the ARM architecture and executed on an Odroid-X board running Linaro, a Linux distribution based on Ubuntu 12.10. A USRP device has been connected to the Odroid and interfaced through its UHD device driver. First experiments show that GNU Radio on Odroid is capable of […]